North Melbourne 03 9328 3200  Dandenong South 03 9706 4978sales@alltradealuminium.com.au

Shop Stainless Steel

Home / Stainless Steel Flat Sheet & Custom Cut
Stainless-Steel-Sheet-

Stainless Steel Flat Sheet & Custom Cut

Please note the maximum sheet size if ordering custom cut

Clear selection
Category: .

Product Description

Stainless Steel Flat Sheet can be used as splashbacks, rangehood flues, worktops, in sinks, bathroom and household equipment, in balustrades, motor vehicle trim and exhausts, garden seating, street furniture, handrails sculptures and artwork.

This stainless steel flat sheet product can be supplied at standard sizes as listed below or we can cut to your desired length at a minimum charge. Just fill in the Custom Cut section.
No. 2B Finish is a bright cold rolled finish commonly produced in the same manner as No. 2D, except that the final light cold rolling pass is done using polished rolls. This produces a more reflective finish that resembles a cloudy mirror. Finish reflectivity can vary from manufacturer-to-manufacturer and coil-to-coil with some coils looking quite mirror-like and others being fairly dull.
No. 4 Finish is characterized by short, parallel polishing lines. It is obtained by mechanically polishing a No. 3 finish with gradually finer abrasives. Depending on the requirements of the application, the final finish can be anywhere between 120 and 320 grit. Higher grit numbers produce finer polishing lines and more reflective finishes. This general-purpose finish is widely used for restaurant, kitchen equipment, food processing and dairy equipment.
No. 8 Finish is the most reflective polished finish that is mirror-like but not a perfect mirror.
Bright Annealed has a mirror like appearance but may have some cloudiness and other imperfections.
Coloured stainless steel is coloured by the interference of light process. There are no paints, dyes or pigments involved in the process and the colours are totally colourfast.
Any orders for material thicker than 3mm the minimum purchase overall must at least be 1.5 M2.
We will let you know when your order will be delivered or ready for pick-up from our store.

Reviews

There are no reviews yet.

Be the first to review “Stainless Steel Flat Sheet & Custom Cut”

Contact Us

Please send us your questions or comments and we will get back to you shortly.

We are closed for Christmas from noon Thursday 20th December until Wed 2nd (Nth Melb) & (9th Dandenong South) January. Nth Melbourne branch from 2nd to 9th Jan is open from 7.30 to 3.30 only.