North Melbourne 03 9328 3200  Dandenong South 03 9706

Shop Stainless Steel

Home / Stainless Steel Door Frame Reveals
Stainless Steel Elevator Door Jambs

Stainless Steel Door Frame Reveals

This stainless steel custom folded door frame reveal product can be custom folded and cut to your required dimensions, the smallest leg we can fold is 10mm, the width across the base (B) must be no smaller than the smallest leg (A&C) and the maximum size from sheet size of 1229 x 3658mm. Follow the steps provided to enter the details for your custom folded reveal. These reveals are designed to have the top (head) running full width past the top of the returns on the sides (jambs), all ends are square cut, if you require us to notch the area out of the head to run past the jambs please advise.

Clear selection
Category: .

Product Description

Common uses for stainless steel door frame reveals are for elevator lift entrances but can be used as a reveal for any opening.

The most widely used stainless steel is the 304, also known as 18/8 for its composition of 18% chromium and 8% nickel.[22] 304 may be referred to as A2 stainless.  The second most common stainless steel is the 316 grade, also called marine grade stainless, used primarily for its increased resistance to corrosion. HRAP (Hot Rolled Annealed & Pickled, also called a No. 1 Finish) – This dull finish is common for heavy gauge material.
Please note that unfortunately thicknesses over 1.5mm the minimum overall order is 1.5M2
We will let you know when your order will be delivered or ready for pick-up from our store.


Contact Us

Please send us your questions or comments and we will get back to you shortly.