Stainless Steel Custom Folded Z
This stainless steel custom folded Z product can be custom folded and cut to your required dimensions, the smallest leg we can fold is 10mm, & middle size must be 25mm or more, the maximum size from sheet size of 1219 x 3658mm. Follow the steps provided to enter the details for your custom folded Z. We endeavour to produce your order to the exact size, however there is a production tolerance of +/- 2.0mm & there will be a small radius at fold.
The most widely used stainless steel grade 304, also may be referred to as A2 stainless. The second most common stainless steel is the 316 grade, also called marine grade stainless, used primarily for its increased resistance to corrosion.
No. 2B Finish is a bright cold rolled finish commonly produced in the same manner as No. 2D, except that the final light cold rolling pass is done using polished rolls. This produces a more reflective finish that resembles a cloudy mirror. Finish reflectivity can vary from manufacturer-to-manufacturer and coil-to-coil with some coils looking quite mirror-like and others being fairly dull.
No. 4 Finish is characterized by short, parallel polishing lines. It is obtained by mechanically polishing a No. 3 finish with gradually finer abrasives. Depending on the requirements of the application, the final finish can be anywhere between 120 and 320 grit. Higher grit numbers produce finer polishing lines and more reflective finishes. This general-purpose finish is widely used for restaurant, kitchen equipment, food processing and dairy equipment.
No. 8 Finish is the most reflective polished finish that is mirror-like but not a perfect mirror.
Bright Annealed Finish has a mirror like appearance but may have some cloudiness and other imperfections.
If you require thicknesses over 3mm please contact us for a quote
We will let you know when your order will be delivered or ready for pick-up from our store.